Home Fire MonitorsWireless Monitor Control Units

Wireless Monitor Control Units

by Marcus Carter
Wireless Monitor Control Units

SA Fire Protection

Wireless Monitor Control Units supplied by SA Fire Protection

Telephone: +39 (0) 050 703 006     Email: Click to email    Website: Click to visit website

Head Office:  Viale Etruria 15, 56021, Cascina (PI), Italy

SA Fire Protection logo

Wireless Monitor Control Units

The wireless units are devices used specifically to control automatic monitors together with the opening and closing of their isolation valves. The system architectures is made of a transmitter and a receiver that can be embedded or interconnected to a PLC located into a power and control console.

The control signals are transferred from the transmitter to the receiver in frequency which are then exchanged to the PLC located in the Master Panel (Power & Control). The available solutions allow for the receiver installation in safe area as well as Zone 1 and 2 GD whereas the transmitter can be operated up to Zone 2 GD.

For complex systems in which the standard solution may not fit the requirements, contact SA Fire Protection to discuss the detail of the desired architecture. For additional information on MASTER Control Panels (Power & Control) where the transmitter can be connected please refer to the following data sheet:

Master Control Panels: DS B 40 10 10 20

Technical characteristics

Wireless Unit:

Transmitter:

  • Housing in Nylon
  • Enabling push button
  • Joystick for monitor upwards / downwards / rightwards / leftwards
  • Joystick or push buttons for nozzle or spreader Jet/fog
  • Push Buttons for water valve
  • Push buttons for foam valve
  • Selector switch 1/n for taking control in multi-installation monitors
  • Battery charger
  • Construction suitable for installation within:
  • Safe Area protection grade IP 65
  • Classified area ATEX :
  • Ex II 3 GD Ex nA nL IIB T6
  • Housing shapes:
  • Portable with shoulder strap

Receiver:

  • Housing in Nylon
  • Construction suitable for installation within:
  • Safe Area protection grade IP 65
  • Classified area ATEX:
  • Supplied in JB II 2 GD Ex d IIB+H2 Ex tD T5 IP66
  • Receiving antenna: coverage area 150 m

Controllable monitors:

  • Electric
  • Electro-hydraulics
  • Movements and Controls:
  • Monitor Upwards / Downwards
  • Monitor Rightwards / Leftwards
  • Nozzle or Spreader Jet/Fog
  • Main valve water
  • Foam Valve

Contact SA Fire Protection

To contact this supplier or receive more details, please complete the request form below.


    Your email address will never be shared with any 3rd parties and you will receive only the type of content for which you have requested.

    You may also like

    This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More