Sigma XT+ supplied by Kentec Electronics
The Sigma XT+ Extinguishant Control Panels from Kentec Electronics are multi-area extinguishant control panels complying with EN12094-1.
Up to 8 zones of conventional detection with up to 4 extinguishant areas are available. Stand-alone extinguishant control units are also available with 2 monitored inputs to receive initiating signals from remote fire detection control panels or addressable modules.
Each extinguishant area has a comprehensive set of inputs and outputs and is configurable via a simple programming interface. All extinguishant areas may have up to 7, serially connected Sigma Si status indication and control units or ancillary relay boards connected via a simple 4 core cable.
The versatility of the control panel can be enhanced further by the fitting of up to 7 Sigma CP Ancillary boards (K580) or Sigma CP Sounder boards (K461) to the RS485 serial bus.
The Sigma XT+ range combines Sigma CP conventional fire detection from two to eight zones.
With highly configurable extinguishing control modules, it provides an integrated control solution for extinguishing systems with up to four protected areas.
The fire detection section connects to the extinguishant control modules via a serial link which allows secure, bi-directional transfer of data between the two. Sigma XT+ modules may be mounted remotely in separate enclosures and connected to Sigma CP panels via this serial interface to provide central fire detection and control with distributed extinguishing systems.
Sigma XT+ modules may also be mounted separately from fire detection and control equipment and activated by addressable output modules or volt free contacts from other systems via two monitored activation inputs.
Main features
- Two, four or eight detection zones
- One to four extinguishant areas
- Dual extinguishant outputs for each area (configurable as Main/Reserve)
- First and second stage sounder outputs for each area
- First and second stage volt-free changeover contacts for each area
- Released volt-free contact per area
- Fault volt-free contact per area
- Programmable extinguishant delays
- Programmable output duration
- Countdown indicator shows time until release in seconds
- Mode select and manual release controls per area
- Monitored remote manual release input, Abort input & Hold input
- Approved and certified to EN12094-1, EN54-2 and EN54-4
Sigma XT+ supplied by Kentec Electronics
Telephone: +44 (0)1322 222121 Email: Click to email Website: Click to visit website
To contact this supplier or receive more details please complete the request form below.
Other products by Kentec Electronics
