Rim Seal Fire Protection System supplied by SA Fire Protection
SA has developed a special Rim Seal Fire Protection System with the aim of preventing rim seal fire outbreak from the very early stages of its development. The system known as SA/Fps Automatic Rim Seal Fire Suppression System is a fire fighting package which integrates a fire detection provision which automatically activates the fire extinguishing agent.
Rim Seal floating roof tank fires represent one of the most dangerous threats for chemical and petrochemical storage farms. During the years the world has experienced several rim seal fires and some of them have developed into large disasters.
Foam Based Rim Seal Fire Protection System
The SA/Fps Automatic Rim Seal Fire Suppression System is available in the following configuration:
a) Foam Based unit ( FFFP or AFFF )
b) Gas Based unit ( HFC 227 ea or CF3I )
a) Foam Based units can be configured with the following operational methods:
- Deluge using a pneumatic linear heat detection system
- Deluge using an electrical linear heat detection system
- Wet type using closed head nozzles
Activation of the unit is via a propellant gas (nitrogen) which can be:
- Stored in the foam tank (Stored Pressurized Unit)
- Held in an external cylinder (Non Pressurized Unit)
Foam Concentrate is available for the unit as per:
Premixed Solution
- Internal Foam Cartridge (with bursting disk)
- External Foam Cartridge (with an in-line mixer)
Discharge Nozzle
- Open type deluge (discharge is simultaneous through all package nozzles)
- Closed type wet (discharge takes place only from those activated. Solution available only for stored pressure units)
b) Gas Based units can be configured with the following operational methods:
- Pre-action using a pneumatic linear heat detection system
- Pre-action using an electrical linear heat detection system
- Wet type using closed head nozzles
Activation of the unit is via a propellant gas (nitrogen) which can be:
- Stored in the container (Stored Pressurized Unit)
Gas extinguishing medium available for the unit are:
- HFC 227 ea
- CF3I
Discharge Nozzle
- Closed type wet (discharge takes place only from those activated. Solution available only for stored pressure units)
Picture Below: Gas Based Rim Seal Unit

Rim Seal Fire Protection System supplied by SA Fire Protection
Telephone: +39 (0) 050 703 006 Email: Click to email Website: Click to visit website
To contact this supplier or receive more details please complete the request form below.
Other products by SA Fire Protection
Electric Deluge Valve VD D E Electric ON OFF Deluge Valve VD OF E Electric ON OFF Pressure Regulating Deluge Valve VD OF E Electro-Pneumatic Deluge Valve VD D EP Chain Operated Monitor Tower PPMC Monitor Tower PPM Rotating Turret TPMG Monitor Master Panels SLAVE Monitor Control Panels IRTX Monitor Command Console Bladder Tank Proportioning System Marmora Hand Wheeled Monitor CPM3 Monitor Trailer Marmora Electro-Hydraulic Monitor Niagara Chain Operated Monitor Niagara Electro-Hydraulic Monitor Niagara Hand Lever Monitor Niagara Hand Wheeled Monitor Niagara Self-Oscillating Monitor Wireless Command Console Robot-TINO Marmora Monitor Rim Seal Fire Protection System VD Deluge Valve VDD Deluge Valve CO2 Safety Interlock System Double Coil SOV SIL Monitors Niagara Fire Monitor Electro-Pneumatic Double Chamber Deluge Valve VDD D EP Electro-Pneumatic Pressure Regulating Deluge Valve VD RPOF EP Electro-Pneumatic ON OFF Deluge Valve VD D EP Electro-Pneumatic ON OFF Double Chamber Deluge Valve VDD OF EP Electro-Pneumatic ON OFF Pressure Regulating Double Chamber Deluge Valve VDD RPOF EP Electric Double Chamber Deluge Valve VDD D E Electric ON OFF Double Chamber Deluge Valve VDD OF E Electric ON OFF Pressure Regulating Double Chamber Deluge Valve VDD RPOF E