Portagauge 5

Portagauge 5 supplied by Coltraco Ultrasonics

Multiple echo ultrasonic thickness gauge

The Portagauge® 5 is a multiple echo ultrasonic thickness gauge for measuring thicknesses of various metals and hard plastics, which ignores any coating up to 20mm in thickness

Overview

The Portagauge® 5 multi echo ultrasonic thickness gauge is a highly accurate and reliable thickness gauge for measuring the thicknesses of various metals and hard plastics, developed to meet BS EN 15317:2013 which is the standard for ultrasonic testing, characterisation and verification of ultrasonic thickness measuring equipment.

The Portagauge® 5 is capable of ignoring any coating up to 20mm in thickness, allowing the material’s true thickness to be measured.

We strive to offer the highest quality instruments, built with exceptional quality materials in the UK and remain competitively priced in the market worldwide through our unique R&D position.

Some of the key advantages of Portagauge® 5 over our competitors:

It is able to ignore paint coatings up to 20mm in thickness, giving you the material’s true thickness readings accurate to +/- 0.1mm
Measurement units available in both metric (millimetres) and imperial (inches)
A-scan and oscilloscope trace functionality is included to assist your measurements, observe material condition and help verify correct return backwall echo to give you confidence that you are measuring the correct wall thickness
We have tried and tested a large number of different materials, including various metals and hard plastics, and have created a built-in database in our Portagauge® 5 containing speed of sound data of 12+ different materials pre-loaded in the unit for convenience which also includes an option to enter custom materials
For marine applications, it meets Classification Society requirements for marine thickness gauge measurement equipment and has an LCD backlight to allow working in dark, poor visibility spaces
Battery life up to 12 hours continuous use on a standard 9V PP3 battery for easy replacement, with battery saving mode – turns off after 30 seconds of inactivity
Technical support and advice available throughout the lifetime of the unit and we are here to help you with your application

We have different sensor options to meet your inspection requirements:

Our standard 2.5 MHz Dual-Element Sensor (Model No. DE2.5-14) is our most robust and widely used sensor option for metal thickness measurements. It has a 14mm diameter sensor face and has a measuring range of 1.5mm – 100.0mm.
Our 5.0 MHz Dual-Element Sensor (Model No. DE5.0-10) is our second most popular sensor option, commonly used for measuring wall thicknesses of small pipes. It has a 10mm diameter sensor face and capable of measuring reliably on pipes no smaller than 25.0mm (1”) in diameter. It has a measuring range of 1.5mm – 100.0mm.
Our 5.0 MHz Dual-Element Sensor (Model No. DE5.0-6) is mostly used for measuring wall thicknesses on your smallest pipes. It has a 6mm diameter sensor face and capable of measuring reliably on pipes no smaller than 15.0mm (1/2”) in diameter. It has a measuring range of 1.5mm – 50.0mm
Our 2.25 MHz Dual-Element Sensor (Model No. DE2.25-12) is our recommended option for measuring highly attenuative materials such as engineering plastics, if the sensor options above do not meet your required application