Hush-Pro Grade C Fire Alarm Controller supplied by C-TEC
Hush-Pro Grade C Fire Alarm Controller BS5839-6 provides fully monitored BS 5839-6 Grade C compliant fire detection, alarm, silencing and test facilities in flats & apartments.
Puts residents in control of their own fire systems by allowing them to test and silence devices whilst standing at floor level.
Easily interfaced to:
- EN54 certified detectors & alarms – providing commercial grade protection in domestic dwellings.
- Cooker shut-off relays – to turn off the supply in the event of a fire.
- Sprinkler monitoring units – to flag if a sprinkler system is isolated.
- Remote overdoor indicators – to warn people in corridors where a fire may be taking place.
- Communal fire systems – to report fires & faults outside the dwelling (see Networked Hush-Pro Systems tab below for details).
- Lifts the typical level of protection from Grade D (interlinked mains/battery alarms) to Grade C.
- Requires additional Hush-Pro field devices.
Hush-Pro Operation & Functions
- When the Hush-Pro system is in its normal state, power is applied to its detection and alarm circuit which is continually monitored for open and short circuit faults.
- When a fire detector within a dwelling triggers, the system’s Alarm sounders and VADs will activate.
- Depending on the system’s configuration, a remote overdoor indicator outside the room and/or cooker shut-off relays may also activate.
- If multiple Hush-Pro systems are connected to a compatible communal fire system, automatic phased evacuation, manual fire brigade evacuation and the off-site reporting of faults and fires may also be possible (see Networked HUSH2 Systems tab above for more details).
Some of the operational options available on Hush-Pro are:-
- A HUSH/SILENCE FUNCTION
- Allows a hushed period of two minutes to be applied (and extended if required) for the management of false alarms
- A ‘HOT WORKS’ FUNCTION
- Allows a hushed/isolation period of fifteen minutes to be applied (and extended if required) to protect against inadvertent activation.
- A ‘TEST’ FUNCTION
- Allows the functionality of the system’s detectors and alarm devices to be electronically tested with relevant faults indicated via the controller’s fault status LED.

Hush-Pro Grade C Fire Alarm Controller supplied by C-TEC
Telephone: 44 (0) 1942 322744 Email: Click to email Website: Click to visit website
To contact this supplier or receive more details please complete the request form below.
Other products by C-TEC




















