Fomtec MX 400 supplied by Dafo Fomtec
The Fomtec MX 400 foam branch pipe produces medium expansion foam of high quality. The quality is generated by the optimal air inlet nozzle.
The advantage of medium expansion is the amount of foam that can be produced, about 5 times more than low expansion.
The Fomtec MX 400 foam branch pipe has also a pressure gauge to ensure an correct operating water pressure. The stainless steel construction gives optimised protection against corrosion.
The branch pipe should be connected to the hose-line. To start foam application, open the ball valve.
The operating pressure should be 5 bar + – 1 bar. For protein based foam concentrates the pressure should be approx. 2 bar It is also to recommend to flush the branchpipe with clear water after every use.
Application
- Fire brigades
- Petrochemical plants
- Tank farms
- Loading areas
- Chemical plants
Recommended foam concentrates
- Fluoroprotein 3% or 6%
- FFFP 3% or 6%
- AR-FFFP 3×6 or 3×3
- AFFF 1%, 3% or 6%
- AR- AFFF 3×6 or 3×3
- Multi purpose foam
Fomtec MX 400 supplied by Dafo Fomtec
Telephone: +46 850 640 566 Email: Click to email Website: Click to visit website
To contact this supplier or receive more details please complete the request form below.
Other products by Dafo Fomtec
Fomtec Enviro eMax Fomtec EnviroSenze 2500 
Ymer HPS Bladdertanks Fomtec FP 3% Fomtec Enviro 3×3 Plus Fomtec Enviro 3% ICAO Fomtec Enviro USP 
Renex BC Standard 
Fomtec AFFF 3% M Foam Concentrate Fomtec Enviro 6×6 Plus Fomtec Skade Tyr Foam Chamber Aske Foam Pourer Fomtec MX 400 Ymer HS Bladdertanks Fomtec AFFF 3% S 
HPJ Jet Pump Ymer VPL Bladdertanks Fomtec EXT Plus Fomtec P 3% 
Fomtec LX 800 
Fomtec Z 400 Inductor Fomtec Siv 600 Fire Monitor Balder B Fire Monitor
