Fomtec BFZ Inductor supplied by Dafo Fomtec
Telephone: +46 850 640 566 Email: Click to email Website: Click to visit website
Head Office: Vindkraftsvägen 8, Stockholm, SE-135 70, Sweden
The Fomtec BFZ Inductor can be installed in all fixed flow systems, especially in areas where deluge nozzles are used such as storage facilities and aircraft hangars.
The Fomtec BFZ (Between Flange Z-inductor) series represents an extension of the existing line of Z-inductors for fixed use.
Application
The BFZ inductor can be installed in all fixed flow systems, especially in areas where deluge nozzles are used such as storage facilities and aircraft hangars.
Operation
The BFZ is installed inside the pipe work between two DIN-PN16-flanges. The BFZ works using the injector principle, i.e. foam concentrate is sucked into the inductor without using a foam pump. Both low and high viscosity concentrates can be used in conjunction with the BFZ.
Depending on the requested flow, pressure, foam concentrate type and proportioning ratio, the inductor will be equipped with the exact orifice at the entry of the foam pipe. Induction performance and suction height can be adjusted up to a physical limit of approximately 8 meters.
Optional
The Fomtec BFZ inductor can be customized to handle a variety of flow rates as well as high viscous alcohol resistant concentrates.
To contact this supplier or receive more details, please complete the request form below..
