FIREMIKS is the efficient proportioning system where cost and environmental concerns are Paramount.
With FIREMIKS dosing is proportional to flow rate and practically independent of pressure variations. This gives a steady admixture within the min and max flow and pressure.
FIREMIKS is available in different flow sizes; from 300 up to 12.000 lpm, with fixed dosing alternatives; 0,5%, 1%, 2%, 3% or selectable. Other dosing options on request. Consists of a robust hydraulic water motor and a concentrate pump – both of displacement (volumetric) type -and linked mechanically by a direct drive coupling.
Works with virtually all types of foaming agents, included the AR-types. Is also suitable for wetting agents and other fire fighting chemicals.
Permits uninterrupted application time as long as foam liquid and water are supplied.
You may use different types of nozzles, at different heights and lengths from FIREMIKS. Changes of length or diameter of pipe/hose system after FIREMIKS up to the nozzles are not affecting the admixture as long as the water pressure from main pump is sufficient to transport the foam/water solution to the end of the system.
Materials used are hard anodized and PTFE-coated aluminum in water motor and bronze in dosing pump.
All other parts are also made in corrosion resistant material such as AISI 316 stainless steel, brass and PET. Requires little maintenance. Other materials available on request.
Flushing of foam pump is made with water when foam inlet is closed.
Optional equipment delivered on request; for example foam return valve for easy and quick checking of admixture rate, without generating water/foam solution.
