The Fire Guard Curtain FC120 is made from stainless steel wire reinforced glass fabric in steel guides, bottom rail and box housing.
Fire protection for kitchen servery hatches, offices, schools and department stores.
The Fire Guard Curtain FC120 provides two hour fire protection to BS476: Part 22 1987 & BSEN 1634-1:2008
The fire curtain is an inconspicuous barrier that is invisible when not in use and when in operation will slow down the spread of fire.
Sizes:
Minimum Width: 800mm
Minimum Height: 800mm
Maximum Width: 6000mm
Maximum Height: 5000mm
Specification of Build:
Bottom Rail is two steel angles attached to the curtain
Guide Rails 100mm x 55mm galvanised steel
End plates 200mm x 220mm galvanised steel
Box 200mm x 200mm galvanised steel supplied in sleeved sections to allow for expansion.
Operation:
Manual
Typical Arrangements:
Face fix or reveal fix.
The Fire Curtin must be fixed to an appropriate masonry, concrete or steel structure that is capable of maintaining adequate support for the required 2 hours.
Operation:
24v DC Tubular motor
Note: The fire curtain is not designed for frequent use, this product is designed to remain open during normal use only to be closed during a test or emergency.
Finish:
Fire curtain is available in a grey finish