CPM3 Monitor Trailer supplied by SA Fire Protection
Telephone: +39 (0) 050 703 006 Email: Click to email Website: Click to visit website
Head Office: Viale Etruria 15, 56021, Cascina (PI), Italy
MONITOR TRAILER – CPM3
Model CPM3 is a high flow rate 22500–37500 lpm (5850-10000 gpm) monitor trailer which is used to gain mobility for high flow firefighting monitors. These trailers are used by industrial fire brigades to fight full surface fire on fuel tanks. The monitor trailer is made of a carbon steel structure on which an aluminum platform is located.
The trailer has four main wheels on the rear plus an additional rotating wheel on the front where the drawn bar with towing ring is connected. On the structure there are several connection equipped with couplings for the interconnection of fire hoses that deliver water to the trailer. On the main trailer flange a monitor is installed which can be equipped with either a nozzle or branch pipe.
The monitor trailer is provided with a connection for the foam concentrate supply, provided by a jet pump manifold supplied with the monitor trailer.
Technical characteristics
MONITOR TRAILER:
- Double-axe frame in hot deep galvanized carbon steel S275JR
- Mechanical stationary break
- Wheels with pneumatic tyres
- N° 4 adjustable stabilizers
- Internal trailer pipe to be selected among:
- Carbon steel hot deep galvanized ASTM A 106 Gr. B
- Stainless steel AISI 304
- Stainless steel AISI 316
- Water power connection:
- STORZ 150 (6”)
- STORZ 125 (5”)
- Foam power connection:
- STORZ 75 (3”)
- STORZ 65 (2 ½”)
- Connections equipped with check valve, cap and chain
- Suction connection nozzle:
- 4”
- 5”
- Monitor horizontal rotation: 360°
- Elevation: +85° / +15°
- Max. working pressure: 16 bar
- Design pressure: 16 bar
- Test pressure: 24 bar
- Natural finishing
MONITOR:
- Body material to be selected among:
- Stainless Steel AISI 304
- Stainless Steel AISI 316
- Inlet flange ANSI in carbon steel, SS AISI 304 or SS AISI 316
- Internal diameter of the body 200 mm (8”) / 250 mm (10”)
- Upwards and Downwards movement via hand wheels
- Rotation on the horizontal plane for 360° in continuous via the hand wheel, the rotation is blocked by the worm gear itself
- Suitable execution for external installation in marine environment and operation with sea water and foam solutions
- Vertical installation
- Max working pressure 16 bar (232 psi)
- Design pressure 16 bar (232 psi)
- Test pressure 24 bar (348 psi)
WATER/FOAM NOZZLE:
- Body material in stainless Steel AISI 316
- Inner parts in stainless steel AISI 316 and brass
- Expansion ratio 1:4 (May vary depending on the foam concentrate)
- Flange connection 6” ANSI 150
- Suitable execution for external installation in marine environment and operation with sea water and foam solutions
- Design pressure: 16 bar (232 psi)
- Inlet for foam concentrate
To contact this supplier or receive more details, please complete the request form below.
