- Control Panels
- Detection Systems
- Fire Alarms
- Fire Alarm Signalling
- Emergency Escape
- Fire Extinguishers
- Fire Extinguishing Powders
- Fire Pumps
- Fire Suppression Systems
- Foam Concentrates
- Industrial Foam Systems
- Industrial Fire Protection
- Passive Fire Protection
- Residential Fire Safety
- SIL Fire Systems
- Structural Fire Protection
- Testing & Approvals
Janus Fire Systems
Address: 1102 Rupcich Drive, Crown Point, IN, 46307, United States
Telephone Number: 1-219-663-1600 Email Address: firstname.lastname@example.org
Janus Fire Systems manufactures and designs engineered clean agent and high- and low- pressure carbon dioxide systems composed of hardware and software tailored to each application.
Systems are UL-listed and FM-approved. Control panels and a full range of detection devices complement the product offering.
Janus Fire Systems is a division of Amerex Corporation, the world’s largest and most innovative manufacturer of hand portable and wheeled extinguishers for commercial and industrial applications. Janus Fire Systems produces High Quality, ISO-9001 certified products for the protection of all types of special hazards .
Janus Fire Systems is a company built on the ideology of excellence, quality, and innovation. We are committed to the safety and well being of our employees, a personalized relationship with our clients, and providing high quality Special Hazard Fire Protection products and services.
Janus Fire Systems is a full service fire protection company committed to providing:
- Quality products
- Personalized Customer Care
- Unsurpassable Innovation
- Customer Training & Education
Staffed by professionals experienced and knowledgeable in special hazard and industrial fire protection, Janus Fire Systems specializes in the design of the following:
3M™ Novec™ 1230 Fire Protection Fluid
A next generation clean agent Halon alternative, 3M™ Novec™ 1230 Fire Protection Fluid makes for a safe and effective waterless fire suppression agent while offering an environmental profile suited for modern green initiatives and environmental concerns.
(3M and Novec are trademarks of 3M Company)
FM-200® Fire Suppression Systems
Used in over one hundred thousand applications in more than 70 nations, FM-200® provides waterless fire suppression without leaving behind residue or particulate. Electrically non-conductive, FM-200® is safe for use where people are present.
(FM-200 is a registered trademark of E.I. du Pont de Nemours and Company)
Carbon Dioxide Fire Suppression Systems
Carbon dioxide (CO2) has been used for decades as a fire protection agent in areas and facilities where water-based suppression is not feasible. In addition to multiple storage and application options, it is one of the most readily available gaseous fire protection agents in use today.
Foam Fire Suppression Systems
Foam suppression systems combine specially designed foam concentrate with precise amounts of water and air to create an expanding blanket of foam that smothers a fire. These properties make foam ideal for protecting flammable and combustible liquids, especially in large volume areas such as airplane hangars and warehouses.
Vortex Fire Suppression Systems
A Vortex™ system is a hybrid water/inert gas system that combines the best of inert gas and water mist fire suppression systems.
(Vortex is a trademark of Victaulic Company)
Water Based Fire Suppression Systems
Sprinkler and water-based systems are widely recognized as a simple yet effective method of automated and fixed fire suppression, dousing flames with an inexpensive and readily available suppression agent – water.
Alarm & Detection
A fire alarm control panel along with associated alarm and detection devices (e.g. smoke detectors, horns and strobes) complete a special hazard fire protection system regardless of the suppression agent. These components operate in conjunction to detect fire threats early, activate the releasing system when appropriate, and notify occupants or workers of the situation.
Special Hazards System Design and Layout
We are dedicated to providing our clients with professional drawings accompanied by complete system layouts. All electrical drawings and connection diagrams are developed in alignment with the projects requirements.
Janus Design Suite®
The Janus Design Suite® is the most advanced design tool for Clean Agent and Carbon Dioxide Fire Suppression Systems available on the market today. From hydraulic calculations to automatic proposal generation to data sheet printouts, it does it all.